wetting good

find your product

filter products by
select technology
select property
select brand
  • More
    Aquaseal 2129

    Aquaseal® 2129 is a water based dispersion formulated with surface active agents. Designed to give adhesion to a range of plastic substrates and provide long lasting, anti-fog performance with minimal impact on heat sealing properties.

    technology:
    anti mist - water based
    properties:
    wetting good
    applications:
    anti mist - film based
    brand:
    Aquaseal
    available in:
    EMEA, Asia Pacific, Americas
    produced in:
    EMEA

    request info
  • More
    Syncera PE 07

    Syncera® PE 07 is a formulated, primary polyethylene dispersion of non-oxidised polyethylene wax, using a mixed anionic/non-ionic emulsifier system. Used as release agent in hot moulding of metal/synthetic components. Excellent wetting/flow, water free layer, anti-corrosion. 

    technology:
    primary PE emulsion - wax emulsions, release - water based
    properties:
    corrosion resistant, release good, wetting good
    applications:
    mould release - metal industry
    brand:
    Syncera
    available in:
    EMEA, Asia Pacific, Americas
    produced in:
    EMEA

    request info
product type ionicity? fca?
Additive W 25 wetting agents n y More

Additive™ W 25 is a liquid, 100% active, silica containing defoamer. Dispersible in water/water based formulations. Efficient defoaming, easy to dose, silicone-free. Applied to promote rapid de-airentrainment of air bubbles in water based formulations. Designed to give minimal surface-defects in coatings.

technology:
wetting agents - water based
properties:
defoaming, readily dispersible, wetting good, silicone free
applications:
performance additives - aluminium based, performance additives - film based
brand:
Additive
available in:
EMEA, Asia Pacific, Americas
produced in:
EMEA

request info
Syncera PE 07 primary PE emulsion a/n n More

Syncera® PE 07 is a formulated, primary polyethylene dispersion of non-oxidised polyethylene wax, using a mixed anionic/non-ionic emulsifier system. Used as release agent in hot moulding of metal/synthetic components. Excellent wetting/flow, water free layer, anti-corrosion. 

technology:
primary PE emulsion - wax emulsions, release - water based
properties:
corrosion resistant, release good, wetting good
applications:
mould release - metal industry
brand:
Syncera
available in:
EMEA, Asia Pacific, Americas
produced in:
EMEA

request info

This overview is a limited selection of our product range. Please contact us to select the right product for your process and performance requirements.