can we help you?

mould release

Use our Syncera wax and primary PE wax emulsions for mould release agents.

find your product

filter products by

additives & modifiers

product type ionicity? fca?
Syncera PE 02 primary PE emulsion a y More

Syncera™ PE 02 is an anionic, primary polyethylene dispersion of non-oxidised polyethylene wax. Applications: anti-block preparation (under water granulation of tacky polymers/hot melt adhesives), die release agent (metal casting/plastic moulding), textile softener/lubricant; additive (coatings/inks). 

technology:
primary PE emulsion - wax emulsions
properties:
release good, lubricant, block resistant
applications:
mould release - metal industry
brand:
Syncera
available in:
EMEA, Asia Pacific, Americas
produced in:
EMEA
Syncera PE 03 primary PE emulsion a/n n More

Syncera™ PE 03 is a primary polyethylene dispersion based on completely non-oxidised polyethylene wax, using a mixed anionic/non-ionic emulsifier system for improved hard water stability. Advantages same as for 02, except no food contact approval  for 03. Two extra applications: additive (polishes), primer (PE extrusion). 

technology:
primary PE emulsion - wax emulsions
properties:
primer, release good, lubricant, block resistant
applications:
mould release - metal industry
brand:
Syncera
available in:
EMEA, Asia Pacific, Americas
produced in:
EMEA
Syncera P 7131 paraffin n y More

Syncera™ P 7131 is a paraffin wax dispersion, based on a non-ionic emulsifier system. Syncera™ P 7131 is designed to give water repellency, release and anti-blocking properties in various applications such as metal, leather, paper, food packaging and building industries.

technology:
paraffin - wax emulsions
properties:
release good, water repellent, block resistant
applications:
leather treatments - leather & textiles, mould release - metal industry, barrier - paper based
brand:
Syncera
available in:
Asia Pacific, Americas, EMEA
produced in:
EMEA
Syncera PE 07 primary PE emulsion a/n n More

Syncera™ PE 07 is a formulated, primary polyethylene dispersion of non-oxidised polyethylene wax, using a mixed anionic/non-ionic emulsifier system. Used as release agent in hot moulding of metal/synthetic components. Excellent wetting/flow, water free layer, anti-corrosion. 

technology:
primary PE emulsion - wax emulsions, release - water based
properties:
corrosion resistant, release good, wetting good
applications:
mould release - metal industry
brand:
Syncera
available in:
EMEA, Asia Pacific, Americas
produced in:
EMEA

This overview is a limited selection of our product range. Please contact us to select the right product for your process and performance requirements.