bonding partial

Dynol® N 1564 is a moisture curing polyurethane system. Used for adhesion of insulation materials (polyurethane foam, phenol resin foam, polystyrene foam, perlite sheets) on roofs. Durable water resistant bond. Excellent adhesion on sendzimir galvanized sheet steel.

Dynol® N 1574 K4 is a moisture curing polyurethane system. Suitable for adhesion of laminated roof covering materials on different substrates. Limited penetration, also when strongly absorbing materials are concerned. Resistant against plasticizer migration.

Dynol® N 1576 is a 1-component solvent based polyurethane adhesive. Used for bonding non-laminated EPDM-rubber on horizontal flat roofs of different substrates. Concrete, cellular concrete, mineralised bituminized roofing material, etc.

Dynol® N 1632 is a solvent free moisture curing polyurethane system. Used for adhesion of fleece laminated roof covering materials on (cellular) concrete, mineralised bituminized roofing material, insulation material, roofing membranes. Applied in (spreaded) ridges or fully bonded.

Dynol® N 1639 is a solvent free moisture curing polyurethane system (brown). Used for adhesion of fleece laminated and many non fleece backed EPDM-foils on (cellular) concrete, mineralised bituminized roofing material, insulation material, roofing membranes. Applied in (spreaded) ridges or fully bonded.

Dynol® U 521 is a moisture curing polyurethane system. Particularly suitable for adhesion of fleece laminated roof covering materials on (cellular) concrete, mineralised bituminized roofing material. Limited penetration also when strongly absorbing materials are concerned.

Dynol ® U 525 LF is a moisture setting polyurethane system. Particularly suitable for adhesion of insulation materials like polyurethane foam, phenol resin foam, polystyrene foam and mineral wool, etc. used for roof insulation. Substrates should be solid, clean, free from ponded water.